JCI Actuators

GRBO are Din Rail 4-8-12 outputs 16 A actuators. Use to control 4, 8, or 12 independent loads/lights or control 2, 4, or 6 independent blind/roller shutters with mechanical end position. This device is intended to be installed on DIN rails.

GRIO-04CH-KNX and GRIO-08CH-KNX are EIB/KNX DIN rail mounting devices. You can use these devices as an interface for any kind of application.

The devices are equipped with 4 or 8 binary inputs (clean contacts) and 4 or 8 binary relay outputs. Connect inputs to conventional switching devices, for example, buttons, switches, floating contacts, or toggles.

Configure inputs with ETS SW, as output to drive LEDs. Use inputs for power commands, dimming, shutter control, or logic control functions.